BNC Male to N Male LMR-240 Coax and RoHS F047-221S0-291S0-40-NSKU: F047-221S0-291S0-40-N
RF cable assembly LMR-240 coax is one of a huge selection of coaxial cables for radio, antenna and interconnect with RF components. RFecho’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense / military and aerial antenna towers.
RFecho products having the frequency of 5.8 GHz, 83% of propagation rate and high voltage of 1500 DC
- Store Name: RFecho
- Vendor: RFecho
- Address: Beijing / 北京, Beijing, Building 58# Caihuying Fengtai District, 12 Floor Caifuxihuan
- No ratings found yet!
- Application, Bias Tee, Instrumentation Components, Passive Devices, Signal Processing, Signal Transmission, System Connections, Telecom, Testing & Measurement
Bias Tee OBT-0142-4Application, Bias Tee, Instrumentation Components, Passive Devices, Signal Processing, Signal Transmission, System Connections, Telecom, Testing & Measurement
Bias Tee OBT-0142-4
The RFecho BIAS TEES series of products range up to 4.2GHz. They have good performance in terms of reliability and ease-of-use when compared to cumbersome user-designed bias tees employing off-the-shelf conical inductors.
This series can be designed to inner-only topology andutilize our standard housings for fast turn manufacturing.
They are asuperior option for biasing amplifiers, lasers, and modulators driven withhigh frequency data patterns.SKU: n/a
- Cavity Band Pass Filter, Cavity Filters
Cavity Band Pass OBP-1880-60
Ocean Microwave band-pass filter (Ocean band-pass filter，abbreviation：OBP) is a filter that allows waves of specific frequencyband to pass through while rejecting other frequency bands.
The product name of this Ocean band-pass filter (OBP) is OBP-1880-60, its Center Frequency(F0) is 1880MHz, its Pass Band Bandwidth is 1850～1910MHz, its Pass Band Insertion Loss is ≤1.5dB, and its Pass Band VSWR is ≤1.3:1.The Stop Band Rejection is≥50dB @F0±70MHzSKU: OBP-1880-60
- Aircrafts, Application, Defense Equipment, EMI/EMF/EMC, Ground Testing, Medical Equipment, Milcom, National Safety, Offshore Marine, On-board Communication, Passive Devices, Public Safety, Radar, rd-offshore-marine, RF Filter Highpass, RF Filters, Satellite Testing, Signal Filtration, Signal Processing, sp-signal-filteration, Testing & Measurement
RF Filter Highpass OWBP-9000-10Aircrafts, Application, Defense Equipment, EMI/EMF/EMC, Ground Testing, Medical Equipment, Milcom, National Safety, Offshore Marine, On-board Communication, Passive Devices, Public Safety, Radar, rd-offshore-marine, RF Filter Highpass, RF Filters, Satellite Testing, Signal Filtration, Signal Processing, sp-signal-filteration, Testing & Measurement
RF Filter Highpass OWBP-9000-10
Model OWBP-9000-10 is a W band waveguide highpass filter with a passband frequency of 90 GHz and higher and a rejection frequency from DC to 84 GHz.
The filter provides a nominal insertion loss of 1.0 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the low side cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.SKU: OWBP-9000-10
- 5G, GaAs, GaAs Monolithic Integrated 0 Degree Power
GaAs Monolithic Integrated 0 Degree Power O1604
O1604 type GaAs monolithic 0 degree power splitter has low insertion loss and excellent port standing wave characteristics in the frequency range of 3.0 ~ 9.0 GHz, isolation greater than 18dB, and is very suitable for microwave hybrid integrated circuits and multi-chips Module.
The chip uses on-chip via metallization process to ensure a good grounding, no additional grounding measures, easy to use. The backside of the chip is metallized and suitable for eutectic sintering or conductive adhesive bonding processes.SKU: n/a