, , , , , , , ,

EMC Biconical Antenna OBC-230-200W


Compare

Biconical antenna is a vertically polarized omnidirectional antenna. Its frequency range is 20MHz – 300MHz. its pattern stability is better. Biconical antenna model
OBC-230-200W is used for transmission and immunity test to meet various EMC standards. Its broadband characteristics make it an ideal choice for a wide range of EMI testing applications, including demonstrating compliance with FCC, CE, MIL-STD,RTCADO-160 and other requirements.

OBC-230-200W biconical EMC broadband antenna has durable aluminum alloy, and we powder coated them to improve corrosion resistance.The OBC-230-200W model is used for radiation and immunity testing to meet various EMC standards.

Its frequency range is 20MHz – 300MHz. The broadband characteristic of biconical antenna makes it an ideal choice for scanning measurement and automatic measurement systems. Biconical antennas can be used for many applications, in which half-wave dipoles have been used traditionally. An enormous reduction of measurement time can be achieved, because the time-consuming tuning of the antenna elements to the half wavelength is not needed, an important condition for seeped broadband measurements.

SPEC

Biconical radial isotropic broadband antenna

20MHz – 300MHz

OBC-230-200W

Biconical antenna is a vertically polarized omnidirectional antenna. Its frequency range is20MHz – 300MHz

. its pattern stability is better. Biconical antenna model OBC-230-200W is used for transmission and immunity test to meet various EMC standards. Its broadband characteristics make it an ideal choice for a wide range of EMI testing applications, including demonstrating compliance with FCC, CE, MIL-STD,

RTCADO-160 and other requirements.

OBC-230-200W biconical EMC broadband antenna has durable aluminum alloy, and we powder coated them to improve corrosion resistance.

The OBC-230-200W model is used for radiation and immunity testing to meet various EMC standards. Its frequency range is 20MHz – 300MHz. The broadband characteristic of biconical antenna makes it an ideal choice for scanning measurement and automatic measurement systems. Biconical antennas can be used for many applications, in which half-wave dipoles have been used traditionally. An enormous reduction of measurement time can be achieved, because the time-consuming tuning of the antenna elements to the half wavelength is not needed, an important condition for seeped broadband measurements.

 

Features

 

Excellent cost-effective choice for low frequency measurements down to 50MHz
Typical standard calibration data (on CD)
Coverage of various mobile radio frequency ranges
Suitable for field-strength and EMC measurements due to high precision
Compact design
Can be used in the lab and for open-field application

 

 

Applications

 

Broadband RX-Antenna for Emission TX-Antenna for Immunity testing

It especially at low frequencies

 

Frequency Range (MHz)

(20-300)MHz

 

Nominal Impedance

50Ω

 

Polarization

Linear

 

Connector

N type female

 

Power Handling

VSWR

200 W

2.0:1

 

Impedance

50 Ohms

 

Pattern Type

Length(mm)

 

Omnidirectional

1940

 

 

PDF

Outline

Plot

Vendor Information

  • Vendor: admin
  • No ratings found yet!